CD4059 Standard “A” Series Programmable Divide-by-N Counter

Programmable divide-by-N down-counter with TTL drive capability

• Part number: CD4059A-MIL
• Technology Family: CD4000
• VCC (Min): 3V
• VCC (Max): 18V
• Bits (#): 1
• Voltage (Nom): 10V
• F @ nom voltage (Max): 8MHz
• ICC @ nom voltage (Max): 0.03mA
• tpd @ nom Voltage (Max): 180ns
• IOL (Max): 1.5mA
• IOH (Max): -1.5mA
• Function: Counter
• Type: Other
• Operating temperature range (C): -55 to 125
• Package Group: CDIP SB | 24

Features:

• Synchronous Programmable N Counter: N = 3 to 9999 or 15,999
• Presettable down-counter with TTL drive capability
• Mode-select control of initial decade counting function
• Master preset initialization

CD4059 standard “A” Series types are divide-by-N down-counters that can be programmed to divide an input frequency by any number “N” from 3 to 15,999. The output signal is a pulse one clock-cycle wide occurring at a rate equal to the input frequency divided by N. This single output has TTL drive capability. The down-counter is preset by means of 16 jam inputs.

The three Mode-Select Inputs Ka, Kb, and Kc determine the modulus (“divide-by” number) of the first and last counting sections. Every time the first (fastest) counting section goes through one cycle, it reduces by 1 the number that has been preset (jammed) into the three decades of the intermediate counting section and into the last counting section, which consists of flip-flops that are not needed for operating the first counting section.

For example, in the 2 mode, only one flip-flop is needed in the first counting section. Therefore, the last counting section has three flip-flops that can be preset to a maximum count of seven with a place value of thousands. If 10 is desired for the first section, Ka is set 1, Kb to 1, and Kc to 0. Jam Inputs J1, J2, J3, and J4 are used to preset the first counting section and there is no last counting section. The intermediate counting section consists of three cascaded BCD decade (10) counters presettable by means of Jam Inputs J5 through J16.

This device is particularly advantageous in communication digital frequency synthesis (VHF, UHF, FM, AM, etc.) where programmable divide-by-“N” counters are an integral part of the synthesizer phase-locked-loop sub-system. The CD4059 can also be used to perform the synthesizer “Fixed Divide-by-R” counting function. It is also useful in general-purpose counters for instrumentation functions such as totalizers, production counters, and “time out” timers.

The CD4059B-series types are supplied in 24-lead dual-in-line plastic packages (E suffix), and 24-lead small-outline packages (M and M96 suffixes).

Related Document:

CD4059 IC Datasheet

* Images are for illustration only; actual product may vary.